1 |
Integrated multi-criteria group decision-making model for supplier selection in an uncertain environment |
Cogent Engineering, Vol. 9, No. 1, Pp. 1-30 (Taylor & Francis) |
Md. Mohibul ISLAM; Masahiro ARAKAWA |
2022 |
Journal |
IPE |
Dr. Md. Mohibul Islam |
2 |
DEVELOPMENT OF ROLLING PLANNING BASE MULTI-STAGE LOGISTICS MODEL CONSIDERING VARIOUS RISKS. |
Proceedings of the International Symposium on Flexible Automation, ISFA 2022-074, July 3-7, Keio University, Yokohama, Japan. |
Md. Mohibul Islam; Masahiro Arakawa |
2022 |
Conference |
IPE |
Dr. Md. Mohibul Islam |
3 |
Hesitant fuzzy-based integrated multi-criteria group decision-making model for supplier selection |
Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.16, No. 4 (The Japan Society of Mechanical Engineers) |
Md Mohibul ISLAM; Masahiro ARAKAWA |
2022 |
Journal |
IPE |
Dr. Md. Mohibul Islam |
4 |
ROBUST MULTI CRITERIA DECISION MAKING MODEL FOR SUPPLIER SELECTION IN FUZZY ENVIRONMENT |
Proceedings of International Symposium on Scheduling 2021, June 25-27, Hosei University, Kyoto, Japan. |
Md. Mohibul Islam; Masahiro Arakawa |
2021 |
Conference |
IPE |
Dr. Md. Mohibul Islam |
5 |
Rolling planning method for two-stage logistics system under unsteady demand |
Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 15, No. 3, Pp. 1-22, (The Japan Society of Mechanical Engineers)) |
Md Mohibul ISLAM; Masahiro ARAKAWA |
2021 |
Journal |
IPE |
Dr. Md. Mohibul Islam |
6 |
Rolling Planning Method for Logistic System for Controlling Inventory and Stock-out Under Unsteady Demand |
3rd International Conference on Mechanical Manufacturing and Industrial Engineering, 2020, August 26-28, Tokyo, Japan (IOP Conference Series: Material Science and Engineering) |
Md Mohibul Islam, Masahiro Arakawa |
2020 |
Conference |
IPE |
Dr. Md. Mohibul Islam |
7 |
Analyzing the Scenario of Ready-Made Garments of Bangladesh for Making the Management More Effective and Green |
Journal of Modern Science and Technology, Vol. 6. No. 1. Pp. 22-36 |
Shofe Ahmed Mozumder and Md. Mohibul Islam |
2018 |
Journal |
IPE |
Dr. Md. Mohibul Islam |
8 |
Determination of Total Labor Cost Based on Time Driven Activities |
Global Science and Technology Journal |
Ashikur Rahman, Md. Mohibul Islam and Md. Iqbal Hossain |
2018 |
Journal |
IPE |
Dr. Md. Mohibul Islam |
9 |
Project Scheduling Problem, Quality Loss and Time-Cost Tradeoff |
World Review of Business Research, Vol. 7. No. 2. Pp. 68–87 |
Farhana Haque, Raisa Tabassum and Md. Mohibul Islam |
2017 |
Journal |
IPE |
Dr. Md. Mohibul Islam |
10 |
Integrated Production Planning in Multi- Component Single Product Environment |
Journal of Modern Science and Technology, Vol. 5. No. 1. Pp. 47-65 |
Firoz Kabir, Safiul Kabir and Md. Mohibul Islam, |
2017 |
Journal |
IPE |
Dr. Md. Mohibul Islam |
11 |
Multi-Stage, Multi-Period Aggregate Production Planning For Minimizing Total Supply Chain Cost |
14th Global Engineering, Science and Technology Conference |
Kabita Mondal, Md. Mohibul Islam and Sarwary Islam |
2017 |
Conference |
IPE |
Dr. Md. Mohibul Islam |
12 |
Multi Product Multi Period Aggregate Production Planning in an Uncertain Environment |
Global Science and Technology Journal, Vol. 4. No. 1. Pp. 1-19. |
Md. Mohibul Islam and Md. Mosharraf Hossain |
2016 |
Journal |
IPE |
Dr. Md. Mohibul Islam |
13 |
Comparison of Employee Motivational Factors and Their Impact between Bangladeshi & Multinational Companies (RMG Sector): A Case Study |
14th Asian Business Research Conference |
Md. Rezaul Karim and Md. Mohibul Islam |
2016 |
Conference |
IPE |
Dr. Md. Mohibul Islam |
14 |
Changeover Time and Non Value Added Time Reduction Policy in RMG Sector in Bangladesh: A Case Study |
12th Global Engineering, Science and Technology Conference |
Tanvir Ahmed, Rayhan Parvez Koushik and Md. Mohibul Islam |
2016 |
Conference |
IPE |
Dr. Md. Mohibul Islam |
15 |
Optimal Supply Chain Network Opportunities: The Case of Bangladesh |
World Journal of Social Science, Vol. 5, No. 3, Pp. 197-210 |
Md. Mashum Billal, Md. Mohibul Islam, Md. Shah Alam and Md. Mosharraf Hossain |
2015 |
Journal |
IPE |
Dr. Md. Mohibul Islam |
16 |
Solving Capacitated Vehicle Routing Problem by Using Heuristic Approaches: A Case Study |
Journal of Modern Science and Technology, Vol. 3. No. 1, Pp. 135-146. |
Md. Mohibul Islam, Sajal Ghosh and Mahfujur Rahman |
2015 |
Journal |
IPE |
Dr. Md. Mohibul Islam |
17 |
Intelligent Traffic Control System Based On Round Robin Scheduling Algorithm |
International Journal of Scientific and Research Publications, Vol. 5, Issue 8. |
Lutfun Nahar Nipa and Md. Mohibul Islam |
2015 |
Journal |
IPE |
Dr. Md. Mohibul Islam |
18 |
Solving a Transportation Problem of a Typical Dairy Firm Considering Fuzzy Environment |
International Conference on Mechanical Industrial and Materials Engineering |
Nadia Tanzeem, Md. Mohibul Islam and Nusrat Jahan |
2015 |
Conference |
IPE |
Dr. Md. Mohibul Islam |
19 |
Application of fuzzy logic in aggregate production planning |
International conference on Mechanical, Industrial and Materials Engineering |
Md. Mohibul Islam, Md. Mosharraf Hossain, Md. Ahsanul Haque Khan and Md. Rokebul Islam |
2013 |
Conference |
IPE |
Dr. Md. Mohibul Islam |
20 |
Statistical quality control approach in typical garments manufacturing industry in Bangladesh: A case study |
9th Asian Business Research Conference |
Md. Mohibul Islam and Md. Mosharraf Hossain |
2013 |
Conference |
IPE |
Dr. Md. Mohibul Islam |
21 |
Study on Workers Occupational Stress and Guidelines at Jute Mills in Bangladesh |
International Conference on Mechanical, Industrial and Energy Engineering |
Md. Mohibul Islam, NilufaYeasmin, Shamima Nasrin Khan, Mst. Anjuman Ara and Md. Mosharraf Hossain |
2013 |
Conference |
IPE |
Dr. Md. Mohibul Islam |
22 |
A Comparative Method Study for Printing Time Reduction in Knitwear Manufacturing Company in Bangladesh: A Case Study |
Journal of Social Science, Vol. 2, No. 5, Pp. 218 – 224. |
Md. Mohibul Islam, Md. Mosharraf Hossain and Md. Ariful Islam |
2012 |
Journal |
IPE |
Dr. Md. Mohibul Islam |
23 |
Factors Influencing Motivation of Garments Worker : A Case Study |
7th Asian Business Research Conference |
Md. Mohibul Islam, Khan Md. Ariful Haque, Md. Mosharraf Hossain, Md. Idris Ali and Md. Azizur Rahman |
2012 |
Conference |
IPE |
Dr. Md. Mohibul Islam |
24 |
Evaluation of OEE for implementing total productive maintenance (TPM) in a sewing machine in a knit Factory |
Global Engineering, Science and Technology Conference |
Khairun Nahar, Md. Mohibul Islam, Md. Mustafizur Rahman and Md. Mosharraf Hossain |
2012 |
Conference |
IPE |
Dr. Md. Mohibul Islam |
25 |
Production Scheduling in a Garments Manufacturing Company: A Case Study |
Conference on Engineering Research, Innovation and Education |
Md. Mohibul Islam, Md. Mosharraf Hossain, Khan Md. Ariful Haque, Md. Ariful Islam, Md. Mahabub Islam and Sazedul Karim |
2011 |
Conference |
IPE |
Dr. Md. Mohibul Islam |
26 |
Surrogate-assisted Genetic Algorithm for Multi-project Scheduling |
Lecture Notes in Networks and Systems, 569, 87-97 |
Md. Asadujjaman, Mohammad Humyun Fuad Rahman, Ripon Chakrabortty, Mike J Ryan |
2023 |
Book Chapter |
IPE |
Md. Asadujjman |
27 |
An Integrated Multi-project Scheduling, Materials Ordering and Suppliers Selection Problem |
Procedia Computer Science |
Md. Asadujjaman, Mohammad Humyun Fuad Rahman, Ripon Chakrabortty, Mike J Ryan |
2023 |
Journal |
IPE |
Md. Asadujjman |
28 |
Stature and sex estimation from shoulder breadth, shoulder height, popliteal height, and knee height measurements in a Bangladeshi population |
Forensic Science International: Reports, 5, 100258 |
Nilufa Yeasmin, Md. Asadujjaman, Md. Rakibul Islam, Md. Robiul Hasan |
2022 |
Journal |
IPE |
Md. Asadujjman |
29 |
Multi-operator Immune Genetic Algorithm for Project Scheduling with Discounted Cash Flows |
Expert Systems With Applications, 195, 116589 |
Md. Asadujjaman, Mohammad Humyun Fuad Rahman, Ripon Chakrabortty, Mike J Ryan |
2022 |
Journal |
IPE |
Md. Asadujjman |
30 |
A Robust Electricity Demand Forecasting of Rajshahi Metropolitan City of Bangladesh |
International Conference on Mechanical, Industrial and Energy Engineering |
Md. Rasel. Sarkar, Md. Limonur Rahman. Lingkon, Nagib MD. Sarfaraj, Md. Asadujjaman |
2022 |
Conference |
IPE |
Md. Asadujjman |
31 |
Supplier Selection Based on Multi-criteria for Multi-product: A Case Study |
International Conference on Mechanical, Industrial and Energy Engineering |
Shamsunnahar. Khanam, Md. Al. Amin, Md. Asadujjaman |
2022 |
Conference |
IPE |
Md. Asadujjman |
32 |
Layout Optimization and Workplace Engineering for Improving Manufacturing Performance with Reference to A RMG Industry |
Proceedings of the 5th International Conference on Industrial & Mechanical Engineering and Operations Management |
Shanjoy. Chowdhury, Md. Asadujjaman, Md. Mosharraf Hossain |
2022 |
Conference |
IPE |
Md. Asadujjman |
33 |
Impacts of Work-Family Role Conflict on Job and Life Satisfaction: A Comparative Study among Doctors, Engineers and University Teachers |
PSU Research Review, 6 |
Tazrin Jahan Priyanka, Momotaj Akter Mily, Md. Asadujjaman, Mohammad Arani, Md Mashum Billal |
2022 |
Journal |
IPE |
Md. Asadujjman |
34 |
Stature Estimation from Footprint Measurements in Bangladeshi Adults |
Forensic Science Research, 7(2), 124-131 |
Md. Asadujjaman, Md. Harun Or Rashid, Md. Sohel Rana, Md. Mosharraf Hossain |
2022 |
Journal |
IPE |
Md. Asadujjman |
35 |
Stature Estimation from Handprint Measurements: An Application to the Medicolegal Investigation |
Egyptian Journal of Forensic Sciences, 11, 1-13 |
Md. Asadujjaman, Md. Golzer Hossain, Md. Sohel Rana, Md. Zahidul Islam |
2021 |
Journal |
IPE |
Md. Asadujjman |
36 |
An Immune Genetic Algorithm for Solving NPV-based Resource Constrained Project Scheduling Problem |
IEEE Access, 9, 26177-26195 |
Md. Asadujjaman, Mohammad Humyun Fuad Rahman, Ripon Chakrabortty, Mike J Ryan |
2021 |
Journal |
IPE |
Md. Asadujjman |
37 |
Resource Constrained Project Scheduling and Material Ordering Problem with Discounted Cash Flows |
Computers & Industrial Engineering, 158, 107427 |
Md. Asadujjaman, Mohammad Humyun Fuad Rahman, Ripon Chakrabortty, Mike J Ryan |
2021 |
Journal |
IPE |
Md. Asadujjman |
38 |
Sex Identification From Hand Measurements Using Machine Learning |
International Conference on Computing, Communication, and Intelligent Systems (ICCCIS) |
Md. Zahidul Islam, Mushfiqur Rahman Supto, Md. Asadujjaman, Ripon Kumar Chakrabortty |
2021 |
Conference |
IPE |
Md. Asadujjman |
39 |
Implementation of Artificial Neural Network on Regression Analysis |
The 5th IEEE Systems Modelling Conference (SMC) |
Mushfiqur Rahman, Md. Asadujjaman |
2021 |
Conference |
IPE |
Md. Asadujjman |
40 |
A Memetic Algorithm for Concurrent Project Scheduling, Materials Ordering and Suppliers Selection Problem |
Procedia Computer Science 192, 717-726 |
Md. Asadujjaman, Mohammad Humyun Fuad Rahman, Ripon Chakrabortty, Mike J Ryan |
2021 |
Journal |
IPE |
Md. Asadujjman |
41 |
Multi-criteria Decision Making for Job Selection |
The 2021 International Conference on Decision Aid Sciences and Applications (DASA'21) |
Mushfiqur Rahman, Md. Asadujjaman |
2021 |
Conference |
IPE |
Md. Asadujjman |
42 |
Teachers’ Job Satisfaction at Tertiary Education: A Case of an Engineering University in Bangladesh |
2020 Sixth International Conference on E-learning (ECONF20) |
Md. Asadujjaman, Md. Harun Or Rashid, Md. Ashraful Alam Nayon, Tarun Kumer Biswas, Mohammad Arani, Md Mashum Billal |
2020 |
Conference |
IPE |
Md. Asadujjman |
43 |
An Immune Genetic Algorithm for Resource Constrained Project Scheduling Problem with Discounted Cash Flows |
2020 IEEE Conference on Industrial Engineering and Engineering Management (IEEM) |
Md. Asadujjaman, Mohammad Humyun Fuad Rahman, Ripon Chakrabortty, Mike J Ryan |
2020 |
Conference |
IPE |
Md. Asadujjman |
44 |
Stature Estimation from Foot Anthropometric Measurements in Bangladeshi Population |
Irish Journal of Medical Science (1971-),189, 365–372 |
Md. Asadujjaman, Sk. Nahid Al Noman & Md. Babor Ali Molla |
2020 |
Journal |
IPE |
Md. Asadujjman |
45 |
Robustness-based Portfolio Optimization under Epistemic Uncertainty |
Journal of Industrial Engineering International, 15, 207–219 |
Md. Asadujjaman & Kais Zaman |
2019 |
Journal |
IPE |
Md. Asadujjman |
46 |
Anthropometric Measurement of External Ear and Correlation with Age in North Regional People of Bangladesh |
Bangladesh Journal of Medical Science, 18(2), 206-210 |
Md. Asadujjaman, Md. Harun Or Rashid & Sohel Rana |
2019 |
Journal |
IPE |
Md. Asadujjman |
47 |
Stature Estimation from Hand Anthropometric Measurements in Bangladeshi Population |
Journal of Forensic and Legal Medicine, 65, 86-91 |
Md. Asadujjaman, Md. Babor Ali Molla & Sk. Nahid Al Noman |
2019 |
Journal |
IPE |
Md. Asadujjman |
48 |
Traffic Scheduling Simulation: A Case of Dhaka City |
Journal of Modern Science and Technology, 5(1), 89-101 |
Hossain, M.S., Ahmad, M., Islam, M.M. & Asadujjaman, M |
2017 |
Journal |
IPE |
Md. Asadujjman |
49 |
A Mixed Integer Linear Programming Model for Solving Close Loop Supply Chain |
Journal of Modern Science and Technology, 5(1), 125-134 |
Saha, A., Asadujjaaman, M. & Asaduzzaman, M. |
2017 |
Journal |
IPE |
Md. Asadujjman |
50 |
The Estimation of Different Body Dimensions from Stature in Bangladeshi Male Population |
Human Factors and Ergonomics Journal, 3(2), 1-6 |
Md. Asadujjaman, Md Mashum Billal, Md. Rasel Sarkar & Md. Golam Rabbani |
2017 |
Journal |
IPE |
Md. Asadujjman |
51 |
Ergonomics Consideration for Hospital Bed Design: A Case Study in Bangladesh |
Journal of Modern Science and Technology, 1(1), 30-44 |
Islam, M.A., Asadujjaman, M., Nuruzzaman, M. & Hossain, M.M. |
2013 |
Journal |
IPE |
Md. Asadujjman |
52 |
Supporting Tools for Transition towards Industry 4.0: A Pressurized Cylinder Manufacturing Case Study |
IEEE, 2020 International Conference on Decision Aid Sciences and Application (DASA), Sakheer, Bahrain, 2020, pp. 310-314, doi: 10.1109/DASA51403.2020.9316865. |
Md Mashum Billal; Miguel Baritto; S. M. Muntasir Nasim; Rumana Afroz Sultana; Mohammad Arani; Ahmed Jawad Qureshi |
2020 |
Conference |
IPE |
Md Mashum Billal |
53 |
Multi-objective optimization for multi-product multi-period four echelon supply chain problems under uncertainty |
Journal of Optimization in Industrial Engineering, Vol.13, Issue 1, Winter & Spring 2020, 1- 17, DOI:10.22094/JOIE.2018.555578.1529 |
Md Mashum Billal, Md Mosharraf Hossain |
2020 |
Journal |
IPE |
Md Mashum Billal |
54 |
Multi-objective optimization for sustainable closed-loop supply chain network under demand uncertainty: A genetic algorithm |
IEEE, International Conference on Data Analytics for Business and Industry, 10.1109/ICDABI51230.2020.9325648 |
Ahmad Sobhan Abir, Ishtiaq Ahmed Bhuiyan, Mohammad Arani, Md Mashum Billal |
2020 |
Conference |
IPE |
Md Mashum Billal |
55 |
Supporting Tool for The Transition of Existing Small and Medium Enterprises Towards Industry 4.0 |
IEEE, 2020 International Conference on Data Analytics for Business and Industry: Way Towards a Sustainable Economy (ICDABI), 10.1109/ICDABI51230.2020.9325704 |
Miguel Baritto; Md Mashum Billal; S. M. Muntasir Nasim; Rumana Afroz Sultana; Mohammad Arani; Ahmed Jawad Qureshi |
2020 |
Conference |
IPE |
Md Mashum Billal |
56 |
An environmentally sustainable closed-loop supply chain network design under uncertainty: application of optimization |
Progress in Intelligent Decision Science. IDS 2020. Advances in Intelligent Systems and Computing, vol 1301. Springer, Cham. https://doi.org/10.1007/978-3-030-66501-2_28 |
Md Ahmed, SM Iqbal, Tazrin Jahan Priyanka, Mohammad Arani, Mohsen Momenitabar, Md Mashum Billal |
2020 |
Conference |
IPE |
Md Mashum Billal |
57 |
Impact of Forecasting Techniques and Market Demand Scenarios on Multi-Product, Multi-Period Aggregate Production Planning |
Review of Industrial Engineering Letters, June 2019, Volume 5, 1, pp 1-11 |
Sharmin Akter Urmee, Taibaton Nesa Shimu, Md Mashum Billal |
2019 |
Journal |
IPE |
Md Mashum Billal |
58 |
Manpower Scheduling: The Case of Bangladesh |
World Journal of Social Sciences, Vol. 8. No. 1. March 2018. Pp. 28 – 41 |
Md Mashum Billal, Razoana Islam, Sharmin Akther Diba |
2018 |
Journal |
IPE |
Md Mashum Billal |
59 |
The estimation of different body dimensions from stature in Bangladeshi male population |
Human Factors and Ergonomics Journal 2017, Vol. 2 (3): 1-6 |
Asadujjaman, Md; Billal, Md Mashum; Sarkar, Md Rasel; Rabbani, Md Golam |
2017 |
Journal |
IPE |
Md Mashum Billal |
60 |
A conceptual design of line follower pick-and-place robot for industrial purpose |
International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December, 2017, RUET, Rajshahi, Bangladesh |
Maruf Ar Rusafi, Md Mashum Billal, Farjana Yasmin, Rukunuzzaman Khan, Sanjida Ferdousi, SM Salauddin Iqbal |
2017 |
Conference |
IPE |
Md Mashum Billal |
61 |
Determination of different body dimensions from stature in Bangladeshi female |
Proceedings of IMEOM 2017 Dhaka, Bangladesh |
Md Asadujjaman, Md Mashum Billal, Md Rasel Sarkar, Md Golam Rabbani |
2017 |
Conference |
IPE |
Md Mashum Billal |
62 |
Optimal supply chain network opportunities: the case of Bangladesh |
World journal of social science, Vol. 5. No. 3. September 2015 Issue. Pp. 197 – 210 |
Md Mashum Billal, Md Mohibul Islam, Md Shah Alam, Md Mosharraf Hossain |
2015 |
Journal |
IPE |
Md Mashum Billal |
63 |
An evaluation of failure modes and effect analysis for a battery manufacturing industry |
Conference: International Conference on Mechanical, Industrial and Materials Engineering 2015 (ICMIME 2015), RUET, Bangladesh |
Md Abdus Salam, Md Mashum Billal, Moshiur Rahman, Md Ariful Islam |
2015 |
Conference |
IPE |
Md Mashum Billal |
64 |
Justification of different heuristic algorithms for scheduling of multiple jobs |
Ripon Kumar Chakrabortty, Md Mosharraf Hossain, Md Mashum Billal, Sufal Chandra Sarker, Shamim Kader Sozal |
6th International Mechanical Engineering Conference & 14th Annual Paper Meet (6IMEC&14APM), Dhaka, Bangladesh |
2012 |
Conference |
IPE |
Md Mashum Billal |
65 |
A novel particle swarm optimization-based grey model for the prediction of warehouse performance |
Oxford University Press |
Md Rakibul Islam, Syed Mithun Ali, Amir Mohammad Fathollahi-Fard, Golam Kabir |
2021 |
Journal |
IPE |
Md. Rakibul Islam |
66 |
LPG Leakage Detector and Controlling Device |
Proceedings of 4th International Conference on Mechanical, Industrial and Materials Engineering (Paper ID: IE-07). 17-19 December, Rajshahi, Bangladesh |
Sharmin Akter Urmee, Janifar Afiat Wafa, Taibaton Nesa Shimu, Mahabub Hossain, Shahed Mahmud, Md. Rakibul Islam |
2019 |
Conference |
IPE |
Md. Rakibul Islam |
67 |
Forecasts of Electricity Demand in Bangladesh by Using Grey Prediction Model, GM (1,1), EWMA and ARIMA Model |
Proceedings of 4th International Conference on Mechanical, Industrial and Materials Engineering (Paper ID: IE-12); 17-19 December, Rajshahi, Bangladesh. |
Pritam Saha, Krisna Roy, Md. Rakibul Islam |
2019 |
Conference |
IPE |
Md. Rakibul Islam |
68 |
Linear Programming Approach to Determine Balance Diet with Minimum Cost: A Case Study |
Proceedings of 4th International Conference on Mechanical, Industrial and Materials Engineering (Paper ID: IE-13). 17-19 December, Rajshahi, Bangladesh |
Shuhag Islam, Mohammad Kamrul Hasan, Md. Rakibul Islam |
2019 |
Conference |
IPE |
Md. Rakibul Islam |
69 |
Defect Reduction by Total Quality Management in a Crackers Manufacturing System |
World Scientific News |
Md Zahid Hasan, Ashique Rezwan, Md Rakibul Islam, Abir Dutta |
2018 |
Journal |
IPE |
Md. Rakibul Islam |
70 |
AHP Based Startup Business Selection of B2C Type E-Business: A Case Study |
Management & Marketing, volume XVI, issue 2/2018 |
Md. Zahid HASAN Limon SAHA, Rokibul ISLAM, Md. Rakibul ISLAM |
2018 |
Journal |
IPE |
Md. Rakibul Islam |
71 |
Autonomous robot path planning using particle swarm optimization in dynamic environment with mobile obstacles & multiple target |
International Conference on Mechanical, Industrial and Energy Engineering 2014 25-26 December, 2014, Khulna, BANGLADESH, ICMIEE-PI-140282-1 |
Md Rakibul Islam, Md Tajmiruzzaman, Md Mahfuzul Haque Muftee, Md Sanowar Hossain |
2014 |
Conference |
IPE |
Md. Rakibul Islam |
72 |
Application of Particle Swarm Optimization in Aggregate Production Planning and Comparison with Genetic Algorithm |
International Conference on Mechanical, Industrial and Energy Engineering 2014 25-26 December, 2014, Khulna, BANGLADESH, ICMIEE-PI-140308 |
Md Rakibul Islam, Md. Shahriar Aziz, Md Mahfuzul Haque Muftee, Md Sanowar Hossain |
2014 |
Conference |
IPE |
Md. Rakibul Islam |
73 |
An Experimental Study of Cutting Fluid on Drilling AISI 1040 Steel |
Journal of Machining and Energy Engineering.Vol 3(43), No. 1, pp. 7-12 |
Md. Abdul ALIM, Md. Julhash UDDIN, Md. Ariful ISLAM |
2019 |
Journal |
IPE |
Md. Ariful Islam |
74 |
Optimization of Drilling Parameters Using Taguchi-Based Grey Relational Analysis and Full Factorial |
Journal of Machining and Forming Technologies, Volume 7, No. 3-4 pp. 157-169. |
5. Shahed Mahmud, Md. Ariful Islam, Md. ShohelRana, and Md. Mosharraf Hossain |
2017 |
Journal |
IPE |
Md. Ariful Islam |
75 |
Implementing SWOT-FTOPSIS Methods for Selection of the Best Strategy: Pharmaceutical Industry in Bangladesh |
Journal of Modern Science and Technology Vol. 5. No. 1. . Pp.65-78 |
Md. Ariful Islam, Sajib Kumar Sikder and Md. Sahab Uddin |
2017 |
Journal |
IPE |
Md. Ariful Islam |
76 |
Optimization of Cutting force in Turning AISI 1040 Steel: Using Taguchi Orthogonal Array and Genetic Algorithm |
International Conference on Mechanical, Industrial and Materials Engineering 2015 (ICMIME2015), 11-13 December, 2015, RUET, Rajshahi, Bangladesh. |
Md. Ariful Islam, Mahbubur Rahaman and Porag Kumar Sharma |
2015 |
Conference |
IPE |
Md. Ariful Islam |
77 |
An Evaluation Of Failure Modes And Effect Analysis For A Battery Manufacturing Industry |
International Conference on Mechanical, Industrial and Materials Engineering 2015 (ICMIME2015), 11-13 December, 2015, RUET, Rajshahi, Bangladesh. |
Md. Abdus Salam, Md.Mashum Billal, Moshiur Rahmanand Md. Ariful Islam |
2015 |
Conference |
IPE |
Md. Ariful Islam |
78 |
Ergonomics Consideration for Hospital Bed Design: A Case Study in Bangladesh |
Journal of Modern Science and Technology, Vol. 1. No. 1. . Pp.30-44 |
Md. Ariful Islam, Md. Asadujjaman, Md. Nuruzzaman and Md. Mosharraf Hossain |
2013 |
Journal |
IPE |
Md. Ariful Islam |
79 |
Cell Formation in a Batch Oriented Production System Using a Local Search Heuristic with a Genetic Algorithm: An Application of Cellular Manufacturing System |
International Conference on Mechanical, Industrial and Materials Engineering 2013 (ICMIME 2013), 1-3 November, 2013, RUET, Rajshahi, Bangladesh. |
Md. Ariful Islam, Sarojit Kumar Biswas, Md. Rashedul Islam, Md. MosharrafHossain |
2013 |
Conference |
IPE |
Md. Ariful Islam |
80 |
Effect of Minimum Quantity Lubrication Technique on Temperature, Chips, Surface Roughness and Wheel Condition in Grinding Alloy Steel |
Journal of Engineering and Applied Science,Vol.2, No.1 |
Md. Ariful Islam, N.R. Dhar, M. N. Islam |
2012 |
Journal |
IPE |
Md. Ariful Islam |
81 |
Role Of Vegetable Oil Based Cutting Fluid On Roundness Deviation, Taper Value, Drill Bit Breakage And Tool Wear For Drilling AISI 1040 Steel |
Proceedings of the 6th International Mechanical Engineering Conference & 14th Annual Paper Meet , 28-29 September 2012, Dhaka, Bangladesh. |
Md. Ariful. Islam and Md. Mosharraf Hossain |
2012 |
Conference |
IPE |
Md. Ariful Islam |
82 |
Implementation of Just in Time (JIT) Philosophy for Reducing Work in Process (WIP) Inventory in Readymade Garments Industries: A Case Study |
Proceedings of the 6th International Mechanical Engineering Conference & 14th Annual Paper Meet, 28-29 September 2012, Dhaka, Bangladesh. |
Md. Ariful Islam, Md.Mosharraf Hossain, Md.Muzahidul Islam and Mofizur Rahman |
2012 |
Conference |
IPE |
Md. Ariful Islam |
83 |
Use of exhaust gas recirculation (EGR) and cyclonic separator for simultaneous NOx and PM reduction in DI diesel engines |
Journal of Petroleum and Gas Engineering, Vol. 2(3), pp. 54-63 |
Murari Mohon Roy, S. M. NajmulHoque, Md. Ariful Islam and Md. MustafizurRahman |
2011 |
Journal |
IPE |
Md. Ariful Islam |
84 |
Performance Evaluation of Bangladeshi Apparel and Textile Supply Chain Network: A Case Study |
World Review of Business Research, pp. 211 – 218,Vol. 1, No.1 |
Khan Md. Ariful Haque, Md. Mosharraf Hossain, Md. Shahriar Jahan Hossain, Md. Ariful Islam, Mehedi Hassan, Md. Shamshuzzaman and Md. DelwarHossain |
2011 |
Journal |
IPE |
Md. Ariful Islam |
85 |
Land Contamination Remediation Policy: Applicability of Low-Temperature Thermal Desorption (LTTD) technology in Rajshahi City |
Conference on Engineering Research, Innovation and Education, 11-13 January2010, Sylhet, Bangladesh |
M M Hossain, M A Islam, K M A Haque, M M Islam and M H O Rashid |
2010 |
Conference |
IPE |
Md. Ariful Islam |
86 |
Production Planning using Simulation Approach verses Hybrid Approach: A Case Study |
International Conference on Industrial Engineering and Operations Management (IEOM), January 9 - 10, 2010, Dhaka, Bangladesh. |
M M Hossain, M D Byrne, K M A Haque, M A Islam and M A AZunaid |
2010 |
Conference |
IPE |
Md. Ariful Islam |
87 |
Performance Evaluation of Minimum Quantity Lubrication (MQL) in Drilling Operation |
International Conference on Mechanical, Industrial and Energy Engineering, MIE10-036- pp1-5, 23-24 December, 2010, Khulna, Bangladesh |
A.M.M. Nazmul Ahsan1, Md. GolamKibria, Md. Raju Ahmed, Md. Ariful Islam and Md. Mosharraf Hossain |
2010 |
Conference |
IPE |
Md. Ariful Islam |
88 |
An Experimental Investigation of Vegetable Oil as cutting Fluid on Drilling AISI 1040 Steel on Different Process Parameters with HSS Drill Bit. |
8th International Conference on Mechanical Engineering December 26-28, 2009 Dhaka, Bangladesh |
M. A. Islam, N. R. Dhar, M. J. Uddin and M. A. Alim |
2009 |
Conference |
IPE |
Md. Ariful Islam |
89 |
Virtual Impactors: A Noble Device to Generate High Concentration Monodisperse Aerosols |
8th International Conference on Mechanical Engineering December 26-28, 2009 Dhaka, Bangladesh. |
Md. Shamim Akhter, Md. Ariful Islam and M.R.I.Sarker |
2009 |
Conference |
IPE |
Md. Ariful Islam |
90 |
Effect of pH of Water of Water-Washing System on Exhaust Emissions in DI Diesel Engines |
Proceedings of the 12th Annual Paper Meet |
Dr. MurariMohon Roy, Md. Ariful Islam, Muhammad Hurmutul Islam |
2008 |
Conference |
IPE |
Md. Ariful Islam |
91 |
Effect of Charcoal Size, Roughness and Temperature of Charcoal-Adsorption System on Exhaust Emissions in DI Diesel Engines |
Proceedings of the 12th Annual Paper Meet 8-9 February 2008, Dhaka, Bangladesh. |
Dr. MurariMohon Roy, Md. Ariful Islam, Md. Saiful Islam, Md. SofiulAzam |
2008 |
Conference |
IPE |
Md. Ariful Islam |
92 |
Effects of Minimum Quantity Lubrication By Vegetable Oil-Based Cutting Fluid on Temperature, Chip Morphology And Surface Finish In Grinding AISI 1060 Steel |
Proceedings of the 4th BSME-ASME International Conference on Thermal Engineering, pp-861-866. 27-29 December, 2008, Dhaka, Bangladesh |
M. A. ISLAM and N.R. DHAR |
2008 |
Conference |
IPE |
Md. Ariful Islam |
93 |
Improvement of The Grindability of AISI-1040 Steel With Application of Minimum Quantity Lubrication (MQL) Technique |
Proceedings of NCDDM-2007 National Conference on Design, Dynamics and Manufacturing, pp 192-198, India |
N. R. Dhar; M. A. Islam |
2007 |
Conference |
IPE |
Md. Ariful Islam |
94 |
Risk Assessment of Power Supply Failure of an Industrial Floor by Using Fault Tree Analysis |
International Conference on Mechanical, Industrial and Materials Engineering (ICMIME 2022), Rajshahi, Bangladesh |
Sohanul Ahasan, S.M. Sakib Hasan, Md. Rasel Sarkar |
2022 |
Conference |
IPE |
Md. Rasel Sarkar |
95 |
Finding the Motivational Factors Influencing Employee Performance: A Case Study on NGO Workers of Bangladesh |
International Conference on Mechanical, Industrial and Materials Engineering (ICMIME 2022), Rajshahi, Bangladesh |
Sohag Miah, Mahmodur Rahman, Md. Rasel Sarkar |
2022 |
Conference |
IPE |
Md. Rasel Sarkar |
96 |
A Robust Electricity Demand Forecasting of Rajshahi Metropolitan City of Bangladesh |
International Conference on Mechanical, Industrial and Energy Engineering 2022 |
Md. Rasel Sarkar, Md. Limonur Rahman Lingkon, Nagib MD. Sarfaraj, Md. Asadujjaman |
2022 |
Conference |
IPE |
Md. Rasel Sarkar |
97 |
The estimation of different body dimensions from stature in Bangladeshi male population |
Human Factors and Ergonomics Journal, Vol. 2, No. 3, pp. 1-6 |
Md. Asadujjaman, Md Mashum Billal, Md. Rasel Sarkar and Md. Golam Rabbani |
2017 |
Journal |
IPE |
Md. Rasel Sarkar |
98 |
Determination of Different Body Dimensions from Stature in Bangladeshi Female |
International Conference on Industrial & Mechanical Engineering, and Operations Management, Dhaka, Bangladesh, pp. 121-126 |
Md. Asadujjaman, Md Mashum Billal, Md. Rasel Sarkar and Md. Golam Rabbani |
2017 |
Conference |
IPE |
Md. Rasel Sarkar |
99 |
Approximation Techniques of Stress Concentration Factor of Double Notched Plate |
International Conference on Mechanical, Industrial and Materials Engineering (ICMIME), Rajshahi, Bangladesh, pp. 1-6 |
Md. Shafiul Ferdous, Md. Robiul Islam, Md. Hasan Ali, Md. Abu Shaid Sujon, Sk. Suzauddin Yusuf, Md. Rasel Sarkar |
2017 |
Conference |
IPE |
Md. Rasel Sarkar |
100 |
Electricity demand forecasting of Rajshahi city in Bangladesh using fuzzy linear regression model |
International Conference on Electrical Engineering and Information Communication Technology (ICEEICT), Dhaka, Bangladesh, pp. 1-3 |
M. R. Sarkar, M. G. Rabbani, A. R. Khan and M. M. Hossain |
2015 |
Conference |
IPE |
Md. Rasel Sarkar |
101 |
Best Supplier Selection Using Analytical Hierarchy Process (AHP) of a Furniture Industry in Bangladesh |
International Conference on Mechanical, Industrial and Materials Engineering (ICMIME), Rajshahi, Bangladesh, pp. 1-5 |
Md. Golam Rabbani & Md. Rasel Sarkar |
2015 |
Conference |
IPE |
Md. Rasel Sarkar |
102 |
Time Series Analysis and Predicting COVID-19 affected patients by ARIMA Model Using Machine Learning |
Journal of Virological Methods, 301(2022)114433 |
3. Choyon, F.A., Suman, N.H., Fahim, M.R.I and Ahmmed, M.S. |
2021 |
Journal |
IPE |
Md. Sazol Ahmmed |
103 |
Prediction of solid waste generation and finding the sustainable pathways in the city of Dhaka |
Emerald |
Md. Sazol Ahmmed, Md. Faisal Arif, Md. Mosharraf Hossain |
2020 |
Journal |
IPE |
Md. Sazol Ahmmed |
104 |
Business Strategy in Bangladesh | Electric Vehicle SWOT- AHP analysis |
Sage |
Md. Nazmul Hasan Suman, Fuad Ahmed Choyon, Md. Sazol Ahmmed |
2020 |
Journal |
IPE |
Md. Sazol Ahmmed |
105 |
A Lean-Kaizen Model to Prepare the Engineering Students for Industry 4.0: A Self-training Manual |
ICMIME, RUET |
Md. Zahid hasan, Md. Sazol Ahmmed, Md. Touhid Nur Rahman et. al. |
2019 |
Conference |
IPE |
Md. Sazol Ahmmed |
106 |
An Approach of Warehouse Space Utilization in Automobile Industry |Case Study on Pragoti Industries Limited |
ICMIME, RUET |
Fuad Ahmed Chyon, Md. Nazmul Hasan Suman, Md. Sazol Ahmmed et. al. |
2019 |
Conference |
IPE |
Md. Sazol Ahmmed |
107 |
Recycle and Reuse of Textile Waste Liquor from Scouring and Bleaching of Cotton |
Global Journal |
Zinia Yasmin, Md. Moynul Hassan Shibly, Md. Sazol Ahmmed et. al. |
2018 |
Journal |
IPE |
Md. Sazol Ahmmed |
108 |
Understanding Apparel Preference of Different Social Status People of Bangladesh Apparel Market |
Global Journal of Research In Engineering |
Md. Moynul Hassan Shibly, Zinia Yasmin, Md. Sazol Ahmmed et. al. |
2018 |
Journal |
IPE |
Md. Sazol Ahmmed |
109 |
An Application of Value Stream Mapping on Health Care Facilities for Reducing Non Value Added Time |
Asian Business Research Conference |
Khairun Nahar, Md. Sazol Ahmmed, Faisal Arifand & Mosharraf Hossain |
2015 |
Conference |
IPE |
Md. Sazol Ahmmed |
110 |
Stature Estimation from Handprint Measurements: An Application to the Medicolegal Investigation”, . https://doi.org/10.1186/s41935-020-00215-1 |
Egyptian Journal of Forensic Sciences, Vol. 11, No. 1 (2021), Pp. 1-12 |
Asadujjaman, M., Hossain, M.G., Rana, M.S., Islam, M.Z. |
2021 |
Journal |
IPE |
Md. Zahidul Islam |
111 |
Walker Designed for Parkinson’s Disease Patients Based on a Survey in Dhaka, Bangladesh (manuscript has been accepted) |
Strojnícky časopis-Journal of Mechanical Engineering, Vol. 70, No. 2 (2020), Pp. 55-66. |
Sarkar, D., Karim, M.U., Ahmed, S., Sultana, F., Islam, M.Z. |
2020 |
Journal |
IPE |
Md. Zahidul Islam |
112 |
Time Befitting Supply Chain for the Future of Bangladesh Apparel Industry by Aligning Industry 4.0 |
Proceedings of International Conference on Mechanical, Industrial and Energy Engineering 2020 (ICMIEE20), 19-21 December, 2020, KUET, Khulna, Bangladesh. |
Fahim, M.R.I., Chyon, F.A., Suman, M.N.H., & Islam, M.Z. |
2020 |
Conference |
IPE |
Md. Zahidul Islam |
113 |
Design and Analysis of an Eight Wheel Stair-Climbing Cart |
4th International Conference on Mechanical, Industrial and Materials Engineering 2019 (ICMIME 2019), 17-19 December, 2019, RUET, Bangladesh. |
Rashid, M., Islam, M.Z., Hasan, M.Z., Rahman, M.T.N., Islam, M.M., Haque, M.R. |
2019 |
Conference |
IPE |
Md. Zahidul Islam |
114 |
A Hybrid Fuzzy AHP and TOPSIS Method for Analyzing the Performance of Public Commercial Banks: A Case Study on Bangladesh |
International Conference on Mechanical, Industrial and Materials Engineering 2019 (ICMIME2019), 17-19 December, 2019, RUET, Rajshahi, Bangladesh |
Hossain, M.M., Islam, M.R., & Islam, M.Z. |
2019 |
Conference |
IPE |
Md. Zahidul Islam |
115 |
Cost effective decisions on service rate of a customer care center with multi-server queuing model |
Journal of Modern Science and Technology, Vol. 4, No. 1 (2016), Pp. 144–153 |
Nahar, K., Islam, M.Z., and Islam, M.M. |
2016 |
Journal |
IPE |
Md. Zahidul Islam |
116 |
Cost minimization of artificial hip bone implantation surgery by adopting additive manufacturing technique and its feasibility assessment |
Ayandegan Institute of Higher Education, Iran |
N. Zahan , F. I. Jony , Kh. Nahar |
2020 |
Journal |
IPE |
Nusrath Zahan |
117 |
Improvement of the student-teacher learning interface with selecting and designing a teaching method |
Ayandegan Institute of Higher Education, Iran |
N Zahan, F Islam, Sh Mahmud |
2020 |
Journal |
IPE |
Nusrath Zahan |
118 |
Proposition of Additive Manufacturing Technique for Artificial Bone Implantations and Its Feasibility Assessment via Cost Analysis |
ICMIEE18-156 |
Nusrath Zahan, M. Fakhrul Islam Jony, Khairun Nahar |
2018 |
Conference |
IPE |
Nusrath Zahan |
119 |
Design and Re-engineering of an Automated Solar Lawn Mower |
IEEE |
Joydev Karmakar Rahul, Souvik Chakraborty, Nabila Khayer, Ar-Rafi Hriday, Limon Mia, Md. Zahidul Islam, Toukir Ahmed |
2021 |
Conference |
IPE |
Toukir Ahmed |
120 |
Perspective of Circular Economy in Bangladesh: A Comprehensive Review Towards Ship Demolition Industry |
IEOM Society |
Sohanul Ahasan, Fariha Nawshin Zaman, Toukir Ahmed |
2021 |
Conference |
IPE |
Toukir Ahmed |
121 |
A Comprehensive Analysis of Bucket Wheel Conveyor for Lifting and Conveying Granular Materials |
ICMIEE |
Shahanaz Akther Sathi, Dipta Das Pranta, Supti Saha, Jawat Kabir Fahim, Hayder Hossain Rahat, Toukir Ahmed |
2020 |
Conference |
IPE |
Toukir Ahmed |
122 |
Analysis of Effects of Machining Parameters on Cutting Force Components in Turning AISI 201 Stainless Steel Using Cemented Carbide Cutting Tool Insert |
Elsevier |
Toukir Ahmed, Nripon Mollick, Shahed Mahmud, Tareq Ahmad |
2020 |
Journal |
IPE |
Toukir Ahmed |
123 |
Assessing Critical Factors Affecting the Mass Adoption of IoT in Bangladesh |
ICMIEE |
Souvik Chakraborty, Nabila Khayer, Toukir Ahmed |
2020 |
Conference |
IPE |
Toukir Ahmed |
124 |
Optimization of Cutting Parameters in Turning of AISI 201 Stainless Steel to Reduce Chip Reduction Coefficient in both Dry and Wet Condition |
IEOM Society |
Tareq Ahmed, Toukir Ahmed, Md. Didarul Islam, Md. Ariful Islam |
2020 |
Conference |
IPE |
Toukir Ahmed |
125 |
A Comparative Analysis of Different Algorithms for Optimizing Cutting Force Components in Turning Stainless Steel |
EMSME |
Toukir Ahmed, Ferdous Al Rafi, Shahed Mahmud |
2020 |
Conference |
IPE |
Toukir Ahmed |
126 |
Forecasting of Foreign Tourists' Arrivals in Bangladesh: A Neural Network Approach |
ICERIE |
Toukir Ahmed, Nripon Mollick, Khairun Nahar |
2019 |
Conference |
IPE |
Toukir Ahmed |